http://www.enn.com/sci-tech/article/31615#
Clay Moulton of
Concept illustrations of Gravia
depict an acrylic column a little over four feet high. The entire column glows
when activated. The electricity is generated by the slow fall of a mass that
spins a rotor. The resulting energy powers 10 high-output LEDs that fire into
the acrylic lens,
creating a diffuse light. The operation is silent and the housing is elegant
and cord free — completely independent of electrical infrastructure.
The light output will be 600-800
lumens — roughly equal to a 40 watt incandescent bulb over a period of four
hours.
To "turn on" the lamp,
the user moves weights from the bottom to the top of the lamp. An hour-glass
like mechanism is turned over and the weights are placed in the mass sled near
the top of the lamp. The sled begins its gently glide back down and, within a
few seconds, the LEDs come on and light the lamp, Moulton said. “It’s more
complicated than flipping a switch but can be an acceptable, even enjoyable
routine, like winding a beautiful clock or making good coffee,” he
said.
Moulton estimates that Gravia’s
mechanisms will last more than 200 years, if used eight hours a day, 365 days a
year. “The LEDs, which are generally considered long-life devices, become
short-life components in comparison to the drive mechanisms,” he
said.
The acrylic lens will be altered by
time in an attractive fashion, Moulton said. “The LEDs produce a slightly
unnatural blue-ish light. As the acrylic ages, it becomes slightly yellowed and
crazed through exposure to ultraviolet light,” he said. “The yellowing and crazing
will tend to mitigate the unnatural blue hue of the LED light. Thus, Gravia
will produce a more natural color of light with age.”
He predicted that the acrylic will
begin to yellow within 10 to 15 years when Gravia is used in a home’s interior
room.
A patent is pending on the Gravia.
To learn more, contact Jackie Reed of Virginia Tech Intellectual Properties
Inc. at 540-443-9217.
About the design competition
Greener Gadgets partnered with
Core77 to seek out design innovations for greener electronics. This competition
engaged established design firms, emerging designers, and design students to
come up with new and innovative solutions to address the issues of energy, carbon
footprint, health and toxicity, new materials, product lifecycle, and social
development. Top entries were showcased live at the conference by a
distinguished panel and the audience after two rounds of rigorous pre-judging.
Entries were evaluated on the following criteria: innovation, clarity of
design, originality, form, and presentation.
Adapted from materials provided by Virginia Tech.
